Most business computer network has a common IP address, 10.0.0.0.1, unlike the home networks that start with 192.168.0.1 or any similar ones. IP addresses are labels that identify a device attached to your computer network. For example, most of the routers come with an IP address. So when you connect the router with your computer, you are connecting it to the web. Hence when you are online, you are not connected to the internet. Instead, you can connect to the network, and therefore you can browse at your free will.
When you purchase a router, a default user name and password will come. Once you connect the router, you have to enter the credentials; else, it will not work. Following are some combinations of user id and passwords for network hardware which are uses 10.0.0.1:
- Admin/password
- (None)/public
- (None)/(none)
- Cisco/Cisco
- Admin/admin
- Cusadmin/highspeed
However, if you see that a default password is not working, you have to reset the router to its factory settings to restore the default username with the password. Once you restore your end, you will log in 10.0.0.1 router with default credentials. It will be better to change the default username and password once you are connected with the network as it is unsafe.
There are also specific issues when you cannot connect the router with the network. It can be for various reasons where the user may enter the wrong username and password. Hence, you are unable to connect the router. If you face further problems, you can always call a professional who will connect the router with your network.
Also Read : 192.168.l5.1
Steps to Log Into 10.0.0.0.1:
If you are using the router with the address 10.0.0.1, you will quickly locate it by typing the IP address. However, you have to connect to the network. Following are the steps to log on to the router:
1. Find the IP Address:
The first step is to find the IP address of your router, as it is essential to log in. However, it will become challenging to log in to the page if you forget the IP address. Nevertheless, there are some options where you will be able to locate the address quickly:
- If you are using a windows platform, the best way to find the IP address is to type ipconfig on the command prompt. You will find the default IP address of the router.
- Another way of finding your router’s IP address is to click on the network and sharing center of your computer. Next, click on the connection tab. You will discover several IP addresses. Check the one under the IPv4 default gateway column.
- If you are using Mac, you can find your router’s IP address from the Utility Window under system preferences.
- You can check on connections for mobile users and then select advanced properties. You will find the IP address located inside the advanced properties.
2. Log in to the Router:
Once you get the IP address of your browser from the default gateway option, you can easily log in from the browser. The first step is to type in the address 10.0.0.1. Once you type the address and press enter, the numerical will change to http://10.0.0.1, and a screen will open where you have to type in the default username and password and click on login.
You can, however, change the username and password at your convenience so that it does not become vulnerable. Once you click on the login button, you will be able to access your router’s control panel. You can then check the configurations of the router and change them accordingly.
3. Reset Configuration Of The Router:
Though there are options to reset the router’s configuration, sometimes it does not work correctly. It may be due to network interferences that are not allowing your router to connect to the network. If you face a similar issue, you need to reset the address to its default factory settings. If you are changing the grounds of the router, you must note down the previous stages. If you forget, it will become challenging to get the original value and, in turn, delay your work.
The 10.0.0.1 IP is the default IP address of many routers. Hence, you can change it at your convenience and access it. However, you must ensure that you do not input the wrong address as it will not work. Some users wrongly type the IP address as 10.0.0.0.1. Therefore, you have to be cautious while typing in the IP address. Once you are through your router setup, you can work smoothly.
Also Read : 192.168 114
Troubleshooting the 10.0.0.0.1:
If you want to log in to the admin panel of your browser, you have to use the correct IP address. But if by mistake you put the wrong address, it will not function as it will open an invalid page. Since the router comes with a default IP address, you have to give the correct address when you log in for the first time. However, if you are facing issues in accessing 10.0.0.1, the following are the ways by which you will be able to troubleshoot the problem:
- Find the correct address and try to log in again.
- Sometimes the IP address doesn’t need to be 10.0.0.1. Hence, before logging in, you must check the IP address correctly, else the page will not display properly.
- One of the most common mistakes that a user makes while typing the IP address is that instead of 10.0.0.1, they type in HTTP //10.0.0.0.1 and hence is unable to access the router.
- You must always check whether you are typing the correct numerical as most users type in “O” instead of 0. Hence, always check that you key in the right numbers.
- One of the best solutions is to restart your Wi-Fi network and the router. Do not instantly connect the router as it will not work. You have to wait for a few minutes and then click the router.
- After you connect your browser, you must make sure that you browse all the web pages.
- If you cannot access your router despite logging in with the correct IP address, try to clear the cache of your computer. It can solve your problem.
- You can also unplug the router for seconds and then plug it back in. Also, see whether the lights in front of the router are blinking.
Also Read : 192.168 2.3 Login
How To Reset The Password Of Logins?
If you type in 10.0.0.0.1/login, you will not get access to your router as it is wrong. You have to type in the correct one, which is 10.0.0.1/login. You must also check the spaces between the numerical as it will not help you access the router. Hence, always check behind the router if you are uncertain about the password. Most of the routers that you see today have a default password that you check from the back of the router.
A small sticker will give you access to the default password. However, if you want to reset the password, the following are the methods: The router’s default username is admin, and the password is the password, and if you have already changed the password and username, you can do a factory reset.
If You Want To Reset The Password:
- Login with the default username and password
- Click on Login
- Once you log in, you will see a page that will ask you to enter a new id and password.
- Click on Change password.
- Enter the new password. The new password must be a minimum of eight characters with both upper and lower case and at least one number.
- Type in the new password in the Re-enter new password field.
If you want to change the username and password of your Wi-Fi
- Login into the Admin tool with http://10.0.0.1
- Click on gateway on the left-hand menu and then connections
- Under Private WI-Fi network, click on Edit to change the name.
- Select the option of the Wi-Fi where you want to change the password.
- Click on save settings.
It is of utmost importance to change the username and password of your password as they are default ones and your computer may be at risk. Hence, it is better to change the username and password to be on the safe side.
Also Read : 192.168 151
Frequently Asked Questions:
Q1. How to log in to 10.0.0.1?
Ans: Every router has a default user name and password that comes with the device. You can find it on a sticker at the back of the router. The IP address lets your router connect to the network. However, before you can work with the router, you have to configure it with the default IP address 10.0.0.1. Following are the steps:
- Open the web browser that you are using.
- Type – http://10.0.0.1 or 10.0.0.1 and not http://10.0.0.0.1. It is because it will not work as it does not exist.
- Once you see the login page of your router’s manufacturer, you can type in the default username and password.
- Make sure that you type the correct username and password; else it will not work.
Q2. Why should you change the username and password after logging in for the first time?
Ans: It is necessary to change the username and password once you log in for the first time because your computer will become vulnerable to viruses and hacking. Hence when you log in for the first time using the default username and password, click on settings to change the password.
You have to make sure that the new password contains a minimum of eight characters. The combination of the characters must be the lower and upper case along with one number and a unique character.
Q3. Why can you not access the 10.0.0.1?
Ans: Maybe you cannot access it due to the following reasons:
- The default address is not usual 10.0.0.1. Hence the browser is unable to place your Admin Panel in 10.0.0.1.
- Sometimes, one may type this – www.10.0.0.1.com, add https://10.0.0.0.1 in the beginning, and instead of typing ‘0’, they type ‘O’ which is a big mistake. Also, you must know that all IP addresses contain 4 decimal numbers and not five.
- You can restart your router and Wi-Fi network. It may solve your problem.
- Ensure that browse other websites.
- Clear the cache from your browser.
- The best option is to reset to factory settings.
Q4. What is Factory Reset?
Ans: Factory reset is the last option that you must try at the end when nothing is working. It works on the same principle as restart as it will revert the previous settings. Hence, you can again log in from the browser with the default username and password.
Q5. Why 10.0.0.0.1 is not correct?
Ans. 10.0.0.0.1 is not correct because it is not the valid format of an IP address. All IP addresses contain four decimal places. Hence, if you try to log in with 10.0.0.0.1, you will not be able to access the router. Moreover, you must also check what you are typing as many users type in ‘O’ instead of ‘0’.
Also Read : 192.168.67
Final Verdict:
Therefore, it is advisable to use the default username and password when you are trying to connect your router with the network. Though the security setting of the routers of the present timeline is much safer than its counterparts, for security reasons, you must constantly change the username and password when you log in for the first time using the default username and password. You can also set up a firewall if you want to block access to certain websites, but before that, you must check that you can access all the websites with your new router.