Got yourself a Mediacom connection lately, but having a hard time accessing the Mediacom router? This guide has got you covered. Mediacom is one of the prominent and widespread network service providers in the United States, where the company operates in around 22 states to small businesses and households. Generally, when the users opt to rent/purchase the router or modem at the time of connection, Mediacom technicians offer all the setup along with the compatible equipment. So, there they are, sorted out with all the settings.
Nonetheless, some users choose to do DIY and get their router, so all the onus falls on them. And, things start to turn out somewhat tricky when accessing the login page as they could not find Mediacom router default login and password to access the setting of the router; until they figure out how easy and quick it is to do so.
Therefore, to assist you with this, here we have shared the most simple and quick steps on how to manage your router with the use of Mediacom Home Network Manager software. No matter if you are a tech geek or a newbie, you can perform various configurations in the router including, change the WiFi network name/password, set up port forwarding for devices, change DHCP server settings, set up a firewall, and other router settings for home or office network by using the following action.
Also Read : Best Wireless Router For Charter Spectrum
How to Find the IP Addresses on Windows And Mac?
Basically, there are two types of IP addresses found, public/ external IP addresses and private/ internal IP addresses. The public address provided by the Internet Service Provider (ISP) is how the internet identifies your network. And, the device within your local network, such as computers, smartphones, etc. operates on a unique private IP address that is usually assigned by the router on your internal network.
- Public/External IP Addresses:
As mentioned above, these addresses are what your internet service provider (ISP) assigns. They are more of a public-facing address of a house or building. Once you move to a different network, the public IP address also changes. These are the most stressed about addresses that one needs to keep protected in the wake to keep oneself from falling into the trap of hacking.
- Private/Internal IP Addresses:
As the name implies, the router sets a private IP address for every device connected to your local network, and that is how your router recognizes your computer and knows what data to send to it as you browse the internet. Private IP addresses are useful in gaining insights into how your router is interacting with devices, which devices are connected to it, and more. A private IP address is a bit more complicated to find, and it is what we are going to discuss in this guide.
If you need to perform changes such as change the network name, create a new WiFi password, or use a different channel to boost your internet speed, it’s imperative to know your router private IP address. As such, Mediacom provides the default IP address on the backside of the router along with the Mediacom Router Default Login credentials consisting of username and password, which one can use these details to access the router’s configuration page. However, in case if you have lost the default IP address, you can use the following methods to find the Mediacom routers IP address based on the system you are using.
Also Read : Best Routers For Verizon FiOS
Steps for Finding IP Address for Windows:
Using the Command Prompt:
- Start Command Prompt on your computer. For this, click on the Win + R button and then type cmd. Press Enter to continue the process.
- Once you perform the above step, a popup will appear. On that window, type ipconfig | findstr /i “Gateway”
- Press the Enter button, and your IP will appear on your screen.
Through the Graphic Interface:
- Click on the ‘start button’ to open the ‘Control Panel’.
- Then, the control panel window will open up where you have to click on the “Network and Sharing Center” icon.
- Now, in the ‘view your active networks’ section, click on the blue link (name of your connection) next to the ‘connections’.
- A small window will pop up, then click on the “Details” button.
- Another window will open up where you can find your router IP address, named “IPv4 Default Gateway.”
Also Read : Best Modem For Gaming
Steps for Finding IP Address for Mac:
Using the command:
- Start by going to Finder >> Application >> Utilities >> Terminal to open Terminal Window.
- Now, type this command: netstat -nr | grep default on the blank space.
- Once you do this, your screen will display the IP address.
Through the Graphic Interface:
- Click the “Apple” menu on the top bar of your screen and select “System Preferences”.
- Once the “System Preference” window opens up, click on the “Network” icon.
- After the window opens, select your network connection either from Wifi or wired connection, and click on the “Advanced” button present at the bottom right of the screen.
Also Read : Best WiFi Router For Multiple Devices
Steps to Login Mediacom Router Page:
It is one of the simplest phases of all. You can access the router in two ways. First by accessing Mediacom Home Network Manager (website) and the other one is by using the router IP address, which can be found either on the backside of the router or by following the steps mentioned above.
Prerequisites before accessing the MediaCom Router Login Page
- Power on the router
- The Mediacom router should be connected to either LAN or WIFI.
Steps to be followed:
- Open your browser, preferably use Google Chrome to achieve fast results.
- Type http://homewifi.mediacomcable.com or type your IP address in the search tab section and press enter.
- After Step 2, you will be directed to a page named ‘control panel’ where you need to provide your Mediacom id and password. (Default Mediacom id: admin & password: admin) Note: In case, if you forget the password, click on “Forgot your passphrase?” to reset it.
- If you are having issues with the particular model of your router, then you can refer to the user manual that was provided to you at the time of purchase. This should let you enter your correct credentials and log in more easily.
- Once you enter the Mediacom router default login id and password and press the login button, the page will direct you to the router default homepage where you can access all routers control functions.
Also Read : Best Dual WAN Router
How to Reset the Mediacom Router Default Login Credentials?
As such, the router comes with Mediacom Router Login credentials, which you can use while setting up your router and configuring settings for the first time. The default credentials are usually admin or cusadmin. However, these credentials are easily accessible by anyone, as they are all over the place beside your router. Hence, it is imperative to change the login credentials as soon as you access the Mediacom router page to prevent it from being susceptible to hacking.
Here are the following steps you can use to reset your login credentials.
- Log in to your Mediacom router login page by visiting homewifi.mediacomcable.com
- Once logged in, go to WIFI under My Wireless Network.
- Enter your desired username in the SSID field to edit your username, and to edit the password, click on the passphrase area. Finally, click on the Save button to save the settings that have been done by you.
- Once you are done with the above steps, try to login with your new username and password.
- While you are changing your default username or password to any preferable credentials, you must make sure that your device is connected to the WiFi network successfully. Because if there is any interruption in the correction, then it will be hard for you to retrieve your user id and password.
Also Read : Best Tri-Band Router
Frequently Asked Questions (FAQ’s):
One can perform the following functions in Mediacom Home Network Manager.
- Set and administer the network.
- Manage or change the WIFI password
- Set Port Forwarding for popular multiplayer games, media devices, and messaging applications.
-
What to do if someone forgets the login password?
As such, the Mediacom router default login credentials are admin or cusadmin, same for both ID and password. But, in case if you have forgotten the reset Passphrase or password, click on the ‘Forgot your Passphrase?’ button, which will require you to enter the email address that you have used to set up the account. Once you do it, you will receive mail with a new passphrase to that email address. You can again reset that password after logging in to your account.
Yes, you can. Go through the following steps to change the username.
- Log in to your Mediacom router login page by visiting homewifi.mediacomcable.com
- Once logged in, go to Wi-Fi under My Wireless Network.
- Enter your desired username in the SSID field to edit your username and click on the Save button to save your settings.
-
How many devices one can connect by using a router at the same time?
You can connect as many devices as you wish. However, the performance might noticeably decrease with the additional device. You will be able to connect as much as three to five devices to the same wireless connection without experiencing a noticeable decrease in network responsiveness.
If you are facing this issue, you can resolve it by restarting your router. Once you restart your router, the system will get back to the default factory settings. After that, you can log in to the router with the Mediacom router default login username and password and again do the configurations. Remember, you have to do all the configuration again after you do the reset, so always make sure to have a backup of the previous setting.
For resetting the Mediacom router, here are the following steps you have to follow.
Step 1: Turn on your router
Step 2: Find the reset button which is usually present at the backside of the router.
Step 3: Press the button using a pin or a pen nib for approx. 10-15 sec., and then release the button.
Step 4: And, once you find router rebooting, do the configurations again to use the internet.
Port forwarding is a method that is used to allow external devices to access computer services on private networks. The port forwarding maps an external port to an internal IP address and port. Most of the online gaming applications require you to configure port forwarding on your home router.
Also Read : Best Router For Spectrum 100 MBPS
Final Verdict:
Configuring your Mediacom routers is not difficult as it seems. If you are facing trouble accessing the Mediacom router login page, you can try the above-mentioned methods as they are pretty simple and straightforward and take merely 5-10 minutes to perform.
We hope you find the information useful. If you did, do let us know. And, for more queries, reach out to us through the comments section below.